NOTE: 如要正确获得假脱机 (SPL) 文件,当前使用的并行连接线必须达到 IEEE1284 标准要求。 另外,对于 C 类并行连接,连接线长度不得超过 10 米(大约 32 英尺),对于 B 类连接,连接线长度不得超过 3 米(大约 9 英尺)。
为了获得假脱机文件,请在驱动程序中执行下列步骤。 要求通过 Microsoft Windows NT 4.0、Windows 2000 或 Windows XP 执行假脱机操作。 转入目标打印机驱动程序的“属性”部分。
选择“Scheduling”选项卡 (Windows NT4.0),或“Advanced”选项卡 (Windows 2000 / XP)。
选择“Keep documents after they have printed”。
一旦驱动程序对打印作业进行了假脱机操作,这些关联的 SPL 文件便被保存在执行假脱机操作的电脑上的以下路径中:
C:\WINNT\System32\spool\printers
Windows NT 4.0 PCL 与 HP Postscript
转至“Properties”、“Scheduling”,然后选择“Print directly to the printer”。
转至“Ports”选项卡,点击“Add Port”按钮,选择“Local port”,然后点击“New Port”按钮。 系统将会提示您指定本地端口的路径,请输入: c:\port.spl.
选择“OK”(“Port Name”对话框中),然后关闭“Printer Ports”对话框。
在“Ports”选项卡中务必选择当前使用的端口。